New smooth, regular and non - absorbent plasters, surfaces without undulations do not need any special preparation. Such surfaces shall need a two coat application by brush.

During application the surface should be well protected from strong winds, hot sun and cold weather. Application should be carried out at a temperature over 5o c. The product is rain proof after eight hours and touch dry after one hour at a temperature of 20o c. The application equipment used should be immediately washed with water.

  • Description
  • Important Information
  • Downloads

Product Description

A. Surface Required Plain, cement sand / stone dust, plaster, gypsum, plywood surfaces etc.

B. Application By Special tools and top coat by brush

C. Film Thickness Upto 2 mm.

D. Consumption Rate 2.00 Kg. Per Sq. Mtr. (approx.) – of base material 0.30 Kg. Per Sq. Mtr. (approx.) – Top Coat material

E. Average Shade Life Upto 10 Years – except blue & green families which comparatively fade faster .

F. Adhesion Virtually Permanent

G. Textures Strait comb like

Product Description


Providing and applying acrylic aggregate textured wall coating in Spectrum Straito finish in shade No. * maintaining material consumption rate of average 2 Kg. per m2 for the base items and 0.3 Kg. top and approx. 2 mm. microns thickness on new walls in the exterior of the building. Undulations, broken edges, minor imperfections / irregularities should be rectified by using a paste made of Spectrum Rectochem Surface Improver mixed with ordinary portland cement in the ratio of 1:1. Old, flaking, plaster of paris, gypsum and highly absorbent surfaces and those already finished with lime or distemper should be brushed down and then treated with a coat of Spectrum Prime Coat diluted with water in the ratio 1:1 and applied by a brush.

Download The PDF:  TDS_STRAITO.pdf